Find the right HVCRC conductor for your line.
Enter your existing conductor, target ampacity and operating conditions. Get a ranked selection of relevant composite core conductor options, with ampacity calculated for your line.
5 to 10 min · Personalized recommendation

1,267 +
conventional conductor references
111 +
Epsilon HVCRC options assessed
Data sheets
Personalized with your requirement
WHY CONDUCTOR ADVISOR™
Turn complex line requirements and constraints into a focused technical recommendation, without searching through hundreds of conductors configurations
Select your current conductor from the database or enter its specifications manually. Conductor Advisor uses your line conditions and performance target to prioritize the most relevant HVCRC solutions.
Optimize for what your line needs most.
Conductor advisor adapts its recommendations to your priority.
Increase line ampacity
Identify HVCRC options capable of meeting your target ampacity while remaining aligned with the diameter, weight and mechanical constraints of the existing line.
Reduce electrical losses
Prioritize lower-resistance options while meeting your target ampacity and reference mechanical requirements.
Reduce mechanical stress
Explore options that can reduce structural loading by optimizing conductor diameter and linear weight.
Get your recommendations in three steps
Have your line information ready and the complete assessment usually takes less than ten minutes.
01
Describe your existing line
Select the conductor currently installed or enter its electrical and mechanical specifications.
ref
Hawk
…
unit system
metric (SI)
…
02
Define targets and conditions
Enter the ampacity you need, operating temperature and environmental conditions.
Target ampacity
900 A
…
Ambient temperature
30°C
…
Wind velocity
0.5 m/s
…
03
Compare and download
Review ranked HVCRC recommendations and download a personalized technical data sheet.
#1 HVCRC® 240-47
#2 HVCRC® Lite (AL0) 250-30
#3 HVCRC® Lite (AL1) 240-55
Results built around your requirements.
Every recommendation is based on the conductor properties and operating conditions you provide.
- Ranked HVCRC recommendations
- Ampacity calculated for your conditions
- Clear electrical and mechanical comparison
- Personalized PDF technical data sheet

A recognized methodology.
Get recommendations using reference calculation methods.
ampacity methodology
IEEE 738-2023
Ampacity calculations apply the current–temperature methodology described in IEEE 738-2023 to the line conditions entered by the user.
Calculation engine
Developed by Epsilon Cable engineers
The calculation engine and recommendation logic were developed in-house by Epsilon Cable’s engineering team.
Conductor Advisor provides preliminary technical recommendations for decision support. Final selection must be confirmed through a comprehensive engineering study covering the complete electrical, mechanical and environmental requirements of the line.
FAQ
Before you begin.
Everything you need to know before launching your assessment.
Yes. Access is free.
Most users receive their recommendations in 5 to 10 minutes when the existing conductor data, target ampacity and line conditions are available.
You can manually enter its main electrical and mechanical specifications and continue the assessment.
No. The results provide a preliminary technical recommendation and must be validated through a comprehensive engineering study before final conductor selection.
Give Conductor Advisor a try
Find the most suitable composite core conductor for your requirement in 5 to 10 minutes.
